Shortlist magnetic drill presses by annular diameter, depth and power. See documented limits and questions to verify before purchase.
This shortlist checks the selected dimensions and power only. Confirm steel grade, base contact, restraint, clearance and the complete manual before use.
As an Amazon Associate I earn from qualifying purchases. Links marked “Check Amazon” are affiliate links.
Model guide availablea compact-capacity corded drill for hole schedules that stay within its 1-1/8-inch annular diameter limit
The 2-inch depth figure is separate from diameter, and a 2-inch cutter is not automatically a 2-inch-diameter cutter. Evolution specifies a 3/8-inch minimum plate thickness. The published magnetic adhesion figure is not a lifting capacity or a reason to ignore that minimum.
Check Amazon
Model guide availablea lighter FEIN core-drilling option for work that fits within a 1-1/4-inch annular diameter
FEIN publishes 700 RPM without load and 450 RPM at full load. A comparison table that shows only 450 alongside other machines' no-load figures would be misleading. Also, JME ShortSlugger II is not the earlier JHM ShortSlugger: the exact product number is important when matching manuals and listings.
Check Amazon
Model guide availablea purpose-built low-profile option when physical clearance prevents an upright drill from reaching the hole
Cutter compatibility is the main purchasing trap. RotaLoc Plus uses a bayonet-style shank, so an ordinary 3/4-inch Weldon set is not a direct substitute. The 1-inch depth limit also means a compact body does not give the same material range as a full-size 2-inch-depth drill.
Check Amazon
Model guide availableA catalog option to compare with the documented models below.
Listing specifications need exact-model manual confirmation. Compare the model number, package contents and regional version before ordering.
Check Amazon
Model guide availablea general fabrication model whose part-number differences matter almost as much as its headline capacity
The newer permanent-magnet HMD904 is a distinct configuration, not a feature to assign to every HMD904. Likewise, swivel models have different weights and magnetic force figures. A product card should identify the exact configuration instead of combining the most attractive attributes across the range.
Check Amazon
Model guide availablea larger-capacity alternative to the S28MAG when a single-speed corded machine suits the work
The US product page lists one speed, not two. Do not import a speed range from a different Evolution machine. Its chuck accessory information also distinguishes the chuck from the HTA47 adapter; confirm what the exact package contains before buying a twist-drill accessory.
Check Amazon
Model guide availablea corded two-speed option for buyers who need a 2-inch annular capacity without maintaining a battery fleet
A 2-inch annular cutter rating does not mean this drill accepts a 2-inch twist drill. It also does not turn the two fixed spindle speeds into variable speed. Do not copy specifications from DWE1622K-QS or other regional versions into a US purchase.
Check Amazon
Model guide availablea two-speed Hougen option when the HMD904's diameter limit is the constraint
Hougen lists the standard machine at 35 pounds and swivel version at 38 pounds. Swivel movement is an alignment feature, not permission to drill on an inadequately supported surface. A Fabricator's Kit and a basic machine also have different accessory contents despite sharing the HMD905 name.
Check AmazonCheck mag drill cutter fit through shank style, retention, pilot, coolant path, depth and approved adapters before buying.
Understand model-specific minimum steel thickness, surface condition and magnetic holding limits before choosing a mag drill.
Compare magnetic drill rental, used equipment and new purchase using complete job cost, condition, support and realistic reuse.